Forklift Training Course Prince George

Forklift Training Course Prince George - Industry and federal regulators have established the criteria for forklift safety training according to their current regulations and standards. People wanting to use a forklift should complete a forklift training course before working with one of these machines. The accredited Forklift Operator Training Program is intended to offer individuals training with the knowledge and practical skills to become an operator of a forklift.

Vehicle and Mobile Equipment safety rules which apply to forklift operation include pre-shift inspections, and regulations for loading and lifting.

An inspection checklist should be done and given to the supervising authority before starting a shift. When a maintenance issue is uncovered, the utilization of the specific machinery should be discontinued until the problem has been dealt with. To be able to indicate the machine is out of service, the keys need to be removed from the ignition and a warning tag placed in a visible place.

Safety regulations for loading would consist of checking the load rating capacity on the forklift to determine how much the machine can handle. When starting the machinery, the forks should be in the down position. Keep in mind that there is a loss of approximately 100 pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting must begin with the driver moving to a stopped position about three inches away from the load. The mast should then be leveled until it has reached a right angle with the load. Lift the forks to an inch under the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other workers. Never allow forks to drag on the ground.

Forklift loads must be loaded in such a way that they are secure and do not create a hazard to other people or objects. Restraining loads is required for materials which could shift during transport and destabilize the forklift.

So as to prevent the movement of drums, drums can be strapped together to lessen movement. Operators of forklifts should drive slowly when moving liquids, to decrease instability in the forklift.

Click to Download the pdf