
Boom Lift License Prince George - Just fully licensed persons should operate an aerial boom lift. Qualification can be attained through a combination of sessions in the classroom and practical training with the particular type of aerial lift that would be used on the job. A License is required for anyone who operates or works on an aerial boom lift.
Vehicle-mounted aerial devices include the following work vehicles: aerial ladders, extensible boom platforms, vertical towers, articulating boom platforms, and whichever combination of these types.
There are several basic safety rules that apply to all boom lifts. Worker safety while in the basket is a main concern. Workers should wear a body harness and lanyard attached to the basket or boom. Never tie off to a structure, equipment or an adjacent pole. Workers should stand on the floor of the basket, and never climb or sit on the basket edge. The manufacturer's load limits must be followed.
Lift operators need to be authorized to operate an aerial lift. The manufacturer's guidebook must be kept inside the lift and the operator must know all aspects of that particular unit. Operators are responsible for ensuring that safety procedures are followed in the operation of the lift. Testing lift controls everyday should be done. Position outriggers and set brakes (if they are utilized) on a stable surface or on pads. When working on a slope, use wheel chocks.
The aerial lift vehicle must never be moved whilst a worker is within the basket of an elevated boom, unless they are utilizing equipment which are specifically designed for this. Extensible boom platforms and articulating boom made use of as employees carriers should have accessible, plainly marked, upper controls. Except for in emergency situations, lower controls should not be used to override upper controls unless permission has been given by the person within the lift.
Do not wear tree or pole climbers shall whilst working from an aerial lift.
Do not alter the insulated portion of the aerial lift.
Make sure that the booms are thoroughly inspected, that the machinery is properly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make sure that the lines are di-electrically tested according to local regulations.