Forklift Training School Prince George

Forklift Training School Prince George - Forklift Training School - For The Safety Of Both The Machine And The User - OSHA and CSA establish criteria for forklift safety training that meets current standards and regulations. Anybody planning to operate a forklift is needed to successfully complete safety training before using whatever type of forklift. The accredited Forklift Operator Training Program is intended to offer those training with the practical skills and knowledge to become an operator of a forklift.

Mobile Equipment and Vehicle safety regulations which apply to forklift operation involve pre-shift checks, and regulations for loading and lifting.

Prior to a shift starting, an inspection checklist should be done and given to the Supervisor or Instructor. If whichever maintenance issue is discovered, the machine should not be used until the issue is dealt with. To be able to indicate the machinery is out of service, the keys have to be removed from the ignition and a warning tag placed in a spot which is visible.

Safety regulations for loading would include checking the forklift's load rating capacity to determine how much the machinery can handle. When starting the equipment, the forks must be in the downward position. Keep in mind that there is a loss of about 100 pounds carrying capacity for every one inch further away from the carriage that the load is carried.

To safely lift a palletized load, drive the forklift to the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch under the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to alert other staff. Do not allow forks to drag on the ground.

Click to Download the pdf